|
5.7 Saving and Retrieving Levelogger Settings Files
To store settings as defaults, click the icon. It will store the settings of the Levelogger into an *.lls file as a series of defaults. The *.lls file will save the Project ID, Location, Sample Mode, Event Percent, Sample Rate, Altitude, Density, Channel ID, Unit and Offset.
To retrieve settings from defaults click the icon from an *.lls file. This is particularly useful if programming several Leveloggers with similar identical settings. Keep in mind that Project ID and Location identification information will be identical and should be distinguished from logger to logger or monitoring point to point.

|