4 Basic USB Installation

	1)	Plug the USB cable into the Leveloader, then into the PC.
	2)	The system will automatically detect the connected unit.

solinst leveloader leveloggers hardware requirements software requirements software installation communication port setting Levelogger communications USB hardware device drivers found new hardware wizard USB drivers usb installation basic usb installation intalling usb drivers usb driver installation installing usb driver for leveloader gold image

Figure 4-1 Found New Hardware Pop-up Window

	3)	This will start the “Found New Hardware Wizard”, click next.
	4)	In the “Install Hardware Device Drivers” window, select “search for a suitable driver for my device (recommended)”.
	5)	In the “Locate Driver File” window, select “Specify a location”.

Figure 4-2 Found New Hardware Wizard
(Click image to enlarge to full size)

	6)	In the next window point the browser to the USB driver folder located in the Levelogger 3_1 folder. Default Destination “C:\Program Files\Solinst\Levelogger3_1\USB Drivers
	7)	Once the installation completes, a system restart may be required.

back to top

High Quality Groundwater & Surface Water Instrumentation

Table of Contents

4 Basic USB Installation

Figure 4-1 Found New Hardware Pop-up Window

Figure 4-2 Found New Hardware Wizard (Click image to enlarge to full size)

back to top

Figure 4-2 Found New Hardware Wizard
(Click image to enlarge to full size)