9.1 Customizable Levelogger Settings File Setup

This feature will allow the user to input up to 10 customized files with pre-defined settings for the Levelogger series including: Project ID, Location, Sample Mode, Sample Rate, Altitude, Density, Channel ID, Units and Offset.

To create a settings file click on the Levelogger Settings File Setup icon located on the Leveloader main screen. Once the setup window appears, enter the desired settings to create the customized file (Figure 9-3). To load the file to the Leveloader click the “Update” button and then click the
load icon .
A message will confirm that the file has been sent.

Levelogger Settings Files can also be saved to the software by selecting the save icon .

The file will be saved as a *.lls file and can be retrieved using the open icon .

Figure 9-3 Levelogger File Settings Window
(Click image to enlarge to full size)

   back to top

The example below shows a customized file in the “Leveloader Settings File Setup” window (Figure 9-4). Please note that inputs into the “Settings File” will appear as the settings file in the Leveloader Gold (Figure 9-5). To create and add more than one customizable file the user must select a new “Levelogger Settings File” slot from the drop down menu.

Figure 9-4 Levelogger Settings File Window - Customized File
(Click image to enlarge to full size)

   back to top

 

Figure 9-5 Leveloader Gold - Load Settings File Window

 

   back to top