December 2004

Certified CMT Installer training a big hit at EXPO!

Solinst launched the NEW Certified CMT Installer program at the 2004 NGWA Expo in Las Vegas.

"The program was a big success", says Jean Belshaw, President of Solinst Canada Ltd.

"We have developed this program to ensure that proper installation methods are being used for our CMT Multilevel System. Installers who have completed the training are listed on the Solinst web site and are referred to clients by our technical staff."

Click here for more information.

June 4, 2004

New Micro Double Valve Pump Released:
3/8" dia Flexible Pnuematic Pump Ideal for Low Flow Sampling

The NEW Micro Double Valve Pump (Micro DVP) has a remarkably small and flexible design. It is a pneumatic pump similar to a Bladder Pump, but using coaxial Teflon® tubing, rather than a Teflon bladder to give high quality samples. It is small enough to fit in 1/2" (13 mm) tubing and all channels of the Solinst Model 403 CMT Systems, as its diameter is only 3/8" (10 mm). The unique combination of flexibility and size make the pump easy to transport and install in a variety of applications.

Click here for more.

May 1, 2004

NEW Narrow 3-Channel CMT Multilevel System:
1.1" dia. system ideal for direct-push installations

Ideal for installation using direct push rigs, the new narrow 3-Channel CMT Multilevel System is only 1.1" (28 mm) in diameter. The extruded polyethylene tube has 3 hex shaped channels with a nominal 3/8" (9.5mm) diameter. Each CMT installation allows the monitoring of 3 discrete zones, with reliable seals, as proven by the 7-Channel CMT.

Now you can install a transect of CMT multilevel wells inexpensively at a site, to provide both horizontal and vertical contaminant distribution and hydraulic head data. This allows unprecedented definition of site conditions, improves decision-making and allows site remediation to be optimized, all at a very reasonable cost.

Click here for more.

April 16, 2004

Downhole Conductivity Made Easy

Ideal for profiling down-hole conductivity and temperature, and for salt-water intrusion investigations, the new TLC Meter is mounted on a SOLINST reel, using accurate SOLINST flat-tape and an intelligent conductivity sensor with platinum electrodes.  A light and buzzer indicate water.  Level is read off the tape. Conductivity and temperature measurements are conveniently displayed on the LCD Screen.  Range 0-80,000µS. Accuracy +/- 1% of reading.  Tape lengths to 300ft. (100m).

Click here for more.

March 10, 2004

Solinst donates 750 ft, (230m) Water Level Meter to aid Honduras Orphanage and Hospital

Solinst Canada Limited is proud to have donated a 750 ft. (230 m) Water Level Meter to Water Missions International for use in their charity projects to bring clean water and sanitation to developing countries.

For more information, click here.