Dog bone design prevents tape from clinging to sides of well
Permanent heat embossed markings are easy to read
Non-stretch tape uses 7 strands of SS on each conductor
Model 101 Water Level Indicators (Flat Tape)
Provides accurate water level measurements in wells, boreholes and standpipes. The Model 101 Water Level Indicator is the most accurate and reliable of the Solinst meters. It is easy to operate and read to 1/100 ft. or to each millimeter.
The Model 101 Water Level Indicator uses a choice of probe designs, attached to a permanently marked polyethylene tape, fitted on a well-balanced reel. P6 pressure-proof probe is available. Similar to the P2 probe, the simple design is easy-to-clean, and hangs straight in wells. It is powered by a standard 9 volt battery housed in an easy-access battery drawer.
Model 101M Mini Water Level Indicator
(Narrow Flat Tape)
The Mini 101 Water Level Indicator is ideal for use in narrow diameter applications as small as 3/8 (10 mm). The Mini 101 Water Level Indicator is available in 65 ft and 20m lengths.
Model 101
Power Reel Water Level Indicator
(Flat Tape)
Inexpensive yet sturdy Model 102 Water Level Indicator uses flexible coaxial cable /probe with segmented weights, ideal for snaking past pumps and down narrow diameter tubes. Markings permanently adhered every 5 ft (1m).
Power reels can be very useful to allow faster or less strenuous operation of longer lengths of tape up to 6,000ft. (1,800m). The 110 volt power reels are available on request.