These instructions are for use with Vista 32 bit Operating Systems.
After plugging in the USB device, if the Found New Hardware Wizard does not automatically appear, proceed to the Manual USB Installation instructions in Section 4.1.4.
4.1.3.2 USB Installation for Windows Vista
1)Plug in the USB device, the system will automatically detect the connected unit and start the 'Found New Hardware' Wizard.
2)From the provided list select "Locate and install driver software (recommended)".
Figure 4-7 Found New Hardware Window
(Click image to enlarge to full size)
5)Select the Browse button and point the navigation window to the provided USB drivers located within the Levelogger4 folder. The default destination is: C:\Program Files\Solinst\Levelogger 4_0\USB Drivers
The selected pathway will be provided within the window, select Next on the wizard to complete the installation.
Figure 4-10 Search for Driver Software Window
(Click image to enlarge to full size)
6) Once the installation completes, a system restart may be required. If the found new hardware wizard prompts again, please repeat steps 1-6.
Table of Contents
