|
|
|
4.1.4 Manual USB Installation
If your device is plugged in and the Found New Hardware Wizard fails to start, then follow these steps:
1) Open the Device Manager. Typically this is found through the path: Start > Control Panel > System > Hardware > Device Manager
Once the Device Manager is open, a version of the following list(s) will appear:
Figure 4-16 Device Manager
(Click image to enlarge to full size)
2) Identify the Solinst device from the list. The device will be categorized under "Other Devices" or "Universal Serial Bus Controllers".
3) Highlight the device in the list and right click. You will see an option to "Update the driver". This will start the "Hardware Update Wizard". Now follow the instructions for your specific Windows version.
|
|
Table of Contents
