|
After you have retrieved the settings of the connected datalogger, the Datalogger Settings tab will identify the Instrument Type, Serial Number, Firmware Version, Project ID, Location, and the Channel Settings.
-
Instrument Type: will display the model of the attached datalogger, i.e.: F100/M30, Barologger, Rainlogger.
-
Serial Number: the unique serial number of the attached datalogger will be displayed.
-
Firmware Version: shows the firmware version of the attached datalogger.
-
Project ID: input your own identification system.
The Project ID is limited to 32 characters.
-
Location: input specific site / location information.
The location is limited to 32 characters.
|
Table of Contents