Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
Home Products Contact Us About Downloads Papers & Info Tradeshows Español Links News

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Bladder Pumps

Model 407 Bladder Pumps

Bookmark and Share




Model 407/408 > Instructions > Model 407/408 Dedicated Well Head


Model 407/408 Dedicated Well Head

 

solinst bladder pumps bladder groundwater samplers dedicated well head manifold bladder pump well head manifold double valve pump well head manifold bladder pump well heads double valve pump well heads image

Model 407/408 2" Dedicated Well Head (#103872)
with Push-Fit Adaptors

Instructions

The Model 407/408 2" (50 mm) Dedicated Well Heads come with two 1/4" (6 mm) Push Fit Adaptors, so that either 1/4" (6 mm) or 3/8" (10 mm) tubing can be used for the sample return line. If 1/4" (6 mm) tubing is desired for the sample return line, simply push the Push-Fit Adaptors into the existing 3/8" Push-Fit Connectors until they seat (one Push Fit Adaptor for the top Connector and one for the underside).

solinst bladder pumps bladder groundwater samplers dedicated well head manifold bladder pump well head manifold double valve pump well head manifold bladder pump well heads double valve pump well heads imageTo attach tubing just push into Push Fit Connector. To release tubing push down on both sides of the Top Ring and pull tubing out.

Note:

See separate operating instructions for the Model 407 Bladder Pumps and Model 408 Double Valve Pumps.
top

 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Home | Products | About | Contact Us | Papers | Downloads | Tradeshows | Links | News | Water Level Meters | Interface Meters
Water Level Loggers | Data Loggers | Multilevel Systems | Groundwater Samplers | Drive-Point Piezometers | Peristaltic Pumps
Careers | Site Map | All Rights Reserved - Copyright © 2011 Solinst Canada Ltd.