1 Introduction to STS Telemetry and Leveloggers

Solinst STS Telemetry Systems provide an economical and efficient method to access remote data instantly. They provide two-way communication between field located dataloggers and a Home Station computer.

STS Telemetry Systems are designed specifically for the high quality Levelogger series of dataloggers. Up to four Solinst dataloggers can be connected to one STS Remote Station, in any combination of the Levelogger Gold, Levelogger Junior, LTC Levelogger Junior, Barologger, or Rainlogger.

STS Systems operate on two basic schedules. A linear "Sample Rate" is set, at which the STS Controller at the Remote Station records a real-time reading from each attached datalogger. A "Report Rate" is set to establish the frequency that the data is sent from the Remote Station to the Home Station Computer. Optionally, dataloggers themselves can be set up to record and store data independently of the STS System. This provides a reliable back-up if circumstances require it.

STS Systems can be set up using CDMA or GSM digital cellular, Ethernet, satellite, or radio communications. Data is 'pushed' from the Remote Station to the Home Station using IP (Internet Protocol), and therefore, dial-up or timing issues are not a problem. The STS Controller stores data in its memory until it has been successfully uploaded by the Home Station computer.

STS Telemetry Systems come with standardized hardware options, and STS Gold Software which allows easy setup, operation, and management of data. Features such as alarm notification, remote diagnostic reporting and firmware updating make it easy to maintain your system, while simplifying data collection.

This manual focuses on configuration, programming, and installation of STS Telemetry Systems using CDMA, GSM, and radio communications. It also discusses the various options to power the Systems. It includes instructions for installing and using STS Software to set up data collection schedules, manage data, perform remote diagnostic checks, and firmware updates. Also provided are References, a Glossary, and Appendices where various technical specifications are shown.