STS Gold Telemetry System User Guide v1.1.1

Quote | Info | Software | Download User Guide (PDF)

1 Introduction to STS Telemetry
and Leveloggers

2 STS Gold Software

3 Home Station Configuration

4 Home Station Hardware Setup

5 Remote Station Hardware
Setup

5.1 STS Controller

5.2 Distribution Box

5.3 Connecting Dataloggers

5.4 Power Source

5.5 Setting Up CDMA Modems

5.6 Setting Up GSM Modems

5.7 Setting Up Radios

5.8 Initialize Your System

6 Configure Your Remote
Station in the Field

7 Accessing Your Data

8 Firmware Updates

9 Maintenance

Glossary of Terms

References

Appendix

View Complete Table of Contents

9100 STS
QuickStart Guide
- PDF (415kb)

3001 Levelogger Series
User Guide

3001 Levelogger Series
QuickStart Guide
- PDF (963kb)

SDI-12 User Guide

Home > 5 Remote Station Hardware Setup

STS Gold Telemetry System User Guide v1.1.1

Quote | Info | Software | Download User Guide (PDF)

Related Products

Note:

It is recommended to check all equipment when you receive it, to ensure all cables and components are accounted for.

It is also recommended you setup the Remote Station in the office, and initialize as a test before installing in the field.

5 Remote Station Hardware Setup

Figure 5-1 Standard Remote Station cables common to all setups (Click image to enlarge to full size)

Note:

GSM setups also come with a Null Modem Cable (#106355) that connects the modem to the Distribution Box, and also the modem to the PC when activating the modem

Figure 5-2 Modem Power Cable (#108845)

Note:

You will need a small slot-head screwdriver to connect the wires to the GSM modem

The three Remote Station setups use the same cables to connect the STS Controller, Battery, and Modem (Serial Cable) to the Distribution Box. The Modem Power Cables for each setup are different, and are shown in Figures 5-2, 5-4, and 5-6.

Figure 5-3 STS Remote Station Setup using GSM (North American System #108846) (Click image to enlarge to full size)

Figure 5-5 CDMA/Radio Power Cable (#108903)

Note:

Radio/CDMA setups also come with a Serial Modem Cable (#106811) that connects the modem to the Distribution Box, and also the modem to the PC when activating the modem

Figure 5-4 STS Remote Station Setup using CDMA (#108738) (Click image to enlarge to full size)

Figure 5-6 STS Remote Station Setup using Radio (#108887) (Click image to enlarge to full size)

Radio Telemetry Systems require a Radio Home Station Assembly (#109051), which contains a second radio (#108895), antenna (#108950), Serial Cable (#106811) for connection to the Home Station Computer, and an AC/DC Power Adaptor (#109056).

Figure 5-1
Standard Remote Station cables common to all setups
(Click image to enlarge to full size)

Figure 5-3
STS Remote Station Setup using GSM
(North American System #108846)
(Click image to enlarge to full size)

Figure 5-4
STS Remote Station Setup using CDMA (#108738)
(Click image to enlarge to full size)

Figure 5-6
STS Remote Station Setup using Radio (#108887)
(Click image to enlarge to full size)