solinst drive-points piezometers direct push equipment sparge points groundwater sampling water level monitoring contaminant plume delineations soil gas sampling UST monitoring groundwater image

Drive-Point Piezometers

solinst drive-points piezometers direct push equipment sparge points groundwater sampling water level monitoring contaminant plume delineations soil gas sampling UST monitoring groundwater image

  • Ideal for initial site investigations
  • High quality stainless steel piezometer tip
  • Completes a simple, very cost effective well
  • Drives 20 to 25 ft in suitable soils

 

615N Simple Well Point

 

615 Barbed Fitting; 1/2" ID Tubing to Surface

 

615C Compression Fitting; 1/4" OD Tubing to Surface

 

615S or SN Shielded Drive-Point

 

615ML Multilevel System

 

The Model 615 Drive-Point Piezometers use a high quality stainless steel piezometer tip, 3/4" NPT pipe for drive extensions and LDPE or PTFE sample tubing, if desired. Combine these with an inexpensive Slide Hammer and you have a complete system.

The Model 615ML Multilevel Drive-Point System allows monitoring of up to 6 zones in one drive. The Drive-Point Ports have a dual barb stem to attach either ¼" OD or ⅜" OD tubing. The Multilevel Drive-Point Piezometer can be installed using extensions and a Manual Slide Hammer, similar to standard 615 installations.

solinst drive-points piezometers direct push equipment sparge points groundwater sampling water level monitoring contaminant plume delineations soil gas sampling UST monitoring groundwater image

Photo above shows the installation of a 615 Drive-Point Piezometer being used for water level measurement with a 101 Water Level Meter and groundwater sampling with a 410 Peristaltic Pump.

The 410 Peristaltic Pump is ideal for sampling groundwater and vapor in shallow piezometer applications. Connect a 12V Battery Holder to create a very portable assembly.

Learn more on getting high-quality groundwater samples with your Drive-Point Piezometer and Peristaltic Pump in our technical bulletin.

 

Low Cost Standpipe Piezometers

solinst drive-points piezometers direct push equipment sparge points groundwater sampling water level monitoring contaminant plume delineations soil gas sampling UST monitoring groundwater image

 

solinst 12v submersible pump

415 12V Submersible Pump

The Solinst 12V Submersible Pump provides an efficient means of purging and obtaining groundwater samples from 2" OD monitoring wells. The compact pump can sample from depths of 36.5 m (120 ft) below ground surface, and is easy to adjust the flow rates up to 13.5 L/min (3.6 US gpm) in shallower applications.

 

Make Your Life Easier In The Field

Consider making your life easier in the field by ordering one of our convenient Field Tables. We have two models available, Well-mount and Stand-alone, to keep your equipment organized and provide a clean, sturdy surface to hold your field tools.

Well-mount Field Table - 115209
Stand-alone Field Table - 115312