Solinst Model 410 Peristaltic Pump<\/strong><\/a> operates from an external 12V DC power supply such as a car, truck or marine 12 volt battery that can supply at least 3\u20135 amps at maximum draw. The pump has a 3 m (10 ft) power cable with connector clips for direct battery connection. <\/p>\nFor more portable, short duration sampling events, attach the optional 12V Battery Holder (see separate instructions).<\/p>\n
The power cable clips are oversized for use with automotive batteries. The red clip connects to the positive (+) battery terminal, black to negative (-) battery terminal. If the battery is connected with reverse polarity the pump will not be harmed, but it will NOT operate until the polarity is connected correctly (the LED on the Pump will remain off with reverse polarity). <\/p>\n
A circuit breaker reset button is located on the side of the pump. In the event the pump amperage exceeds 10 amps, the circuit breaker will trip (button pops out) and turn the pump off. To reset the breaker, simply press the reset button back in to regain operation of the pump. <\/p>\n
If the pump is to be powered by a typical 45Ah vehicle battery for more than 3 continuous hours, start vehicle and run for 15 minutes to recharge the battery.<\/p>\n
[\/et_pb_text][\/et_pb_column_inner][\/et_pb_row_inner][et_pb_row_inner column_structure=”1_2,1_2″ use_custom_gutter=”on” _builder_version=”4.27.4″ _module_preset=”3676f7e6-7b83-4698-94ce-2cc9fa9ae43d” global_colors_info=”{}”][et_pb_column_inner type=”1_2″ saved_specialty_column_type=”3_4″ _builder_version=”4.27.4″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” custom_padding=”|||0px|false|false” custom_css_free_form=”width: 68%!important;||margin-right: 2%!important;” global_colors_info=”{}” background__hover_enabled=”on|hover” background_color__hover=”” background_enable_color__hover=”off”][et_pb_image src=”https:\/\/www.solinst.com\/wp-content\/uploads\/2026\/01\/solinst-peristaltic-pump-setup.webp” alt=”solinst model 410 peristaltic pump setup” title_text=”Solinst Model 410 Peristaltic Pump Setup” align=”center” _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_image][\/et_pb_column_inner][et_pb_column_inner type=”1_2″ saved_specialty_column_type=”3_4″ _builder_version=”4.27.2″ _module_preset=”default” background_color=”RGBA(255,255,255,0)” custom_padding=”|||0px|false|false” custom_css_free_form=”width: 68%!important;||margin-right: 2%!important;” global_colors_info=”{}” background__hover_enabled=”on|hover” background_color__hover=”” background_enable_color__hover=”off”][et_pb_text _builder_version=”4.27.4″ _module_preset=”default” ol_font=”|700|||||||” ol_text_color=”#494949″ ol_font_size=”18px” global_colors_info=”{}”]<\/p>\n
Solinst Model 410 Peristaltic Pump Setup<\/strong><\/h2>\n\n- Pump Head Tubing (5\/8 inch or 3\/8 inch)<\/li>\n
- Extra tubing may be connected, or the sample can just discharge out of the pump head tubing<\/li>\n
- Down-hole Tubing (1\/2 inch or 12\/4 inch)<\/li>\n<\/ol>\n
[\/et_pb_text][et_pb_text _builder_version=”4.27.4″ _module_preset=”e910b435-fe18-45d2-b351-bda808b1a267″ ol_font=”|700|||||||” ol_text_color=”#494949″ ol_font_size=”18px” global_colors_info=”{}”]<\/p>\n
Note: <\/strong><\/h3>\nDown-hole tubing is inserted inside the pump head tubing by about 25 mm (1 inch). The friction-fit holds the tubing together. <\/p>\n
[\/et_pb_text][\/et_pb_column_inner][\/et_pb_row_inner][et_pb_row_inner _builder_version=”4.27.4″ _module_preset=”3676f7e6-7b83-4698-94ce-2cc9fa9ae43d” global_colors_info=”{}”][et_pb_column_inner saved_specialty_column_type=”3_4″ _builder_version=”4.27.2″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.27.4″ _module_preset=”e910b435-fe18-45d2-b351-bda808b1a267″ global_colors_info=”{}”]<\/p>\n
\n
\n
IMPORTANT <\/strong><\/h3>\n\n- To avoid misuse, refer to the LED status indicator light<\/li>\n
- The pump should be operated in an upright position, sitting on the rubber feet on the bottom of the pump (handle and dial on top).<\/li>\n
- Pump is water resistant but not waterproof. Do not submerge in water. <\/li>\n
- Pump is not designed for long-term continuous uninterrupted use.<\/li>\n
- To avoid motor damage due to over-heating, allow pump to cool fully at least every 7\u20138 hours, or more often under high ambient heat conditions.<\/li>\n
- Pumping rates and suction lift will decrease with elevation, and as the amount of lift increases.<\/li>\n
- Replace the tubing regularly. Worn tubing can cause the pump to be inefficient. This will show as a limited ability to lift water. If the tubing looks worn, flattened or cracked, replace the tubing. <\/li>\n
- If used in cold weather, ensure that there is no ice in the tubing before starting the pump.<\/li>\n<\/ul>\n<\/div>\n<\/div>\n
[\/et_pb_text][\/et_pb_column_inner][\/et_pb_row_inner][et_pb_row_inner column_structure=”1_2,1_2″ _builder_version=”4.27.4″ _module_preset=”3676f7e6-7b83-4698-94ce-2cc9fa9ae43d” global_colors_info=”{}”][et_pb_column_inner type=”1_2″ saved_specialty_column_type=”3_4″ _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][et_pb_text _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n