The Model 101 P7 Water Level Meter uses extremely durable PVDF Solinst laser marked flat tape, accurately etched every 1/100 ft or millimeter, certified traceable to National Standards. The tape features a thick dog bone design, reducing adherence to well casings, and has high tensile strength and electrical efficiency. The Meter has a P7 pressure-proof probe designed for submergence to 1000 ft (300 m). The sensor at the tip of the probe provides consistent measurements with almost zero displacement.
more >>

Designed with non-stretch, repairable tape, the Solinst Model 101 P2 Water Level Meter has heat embossed markings every 1/100 ft or millimeter. The stranded stainless steel conductors provide extra strength and protection against corrosion. Provides accurate water level measurements in wells and boreholes. Rugged design is ideal for use in the field. The P2 Probe has a simple design, is easy-to-clean, hangs straight in wells, and is very easy to repair.
more >>

Designed for rugged field use, the Solinst Model 122 Interface Meter features a narrow 5/8” (16 mm) diameter probe, flexible flat tape, and sturdy reel. Meters provide clear and accurate measurements of product level and thickness, and are approved for use in explosive environments. Each meter is provided with a grounding clip, carrying bag, and tape guide. 122 Mini is a convenient smaller version.
more >>

Designed to measure groundwater levels in narrow tubes and piezometers, the Model 102 Coaxial Cable Water Level Meter features probes for use in wells as small as 3/8” (10 mm). The strong, flexible cable has heavy-duty polyethylene jacket with permanent laser etched markings every 1/100 ft or millimeter. A 102M Mini Water Level Meter is also available with laser marked cable, mounted on a small lightweight reel.
more >>

The Solinst Tag Line uses a weight attached to a laser marked cable (every 5 cm or 1/4 foot), which is mounted on a sturdy, free-standing reel. The 1/16" (1.6 mm) stranded stainless steel wire line is primarily used during the installation of monitoring wells to measure depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer.
more >>