SOLINST EUREKA 标识

Solinst Eureka
2113 Wells Branch Pkwy, Suite 4400
Austin, TX, USA
78728

电话:+1 512-302-4333
传真:+1 512-251-6842
电子邮件:[email protected]

 

准确的水位数据

可靠耐用的仪器

请将本快速参考指南作为《水质探头用户指南》的补充。

加载 Manta 控制电脑软件(适用于 Windows)

从 Solinst Eureka USB 闪存盘或https://downloads.solinst.com/下载(链接也可在 Solinst Eureka 网页的 “支持 “下找到)。USB 闪存盘还包括水质探头用户指南

连接水质探头

  1. 将数据线连接到 USB 至 RS-232 适配器
  2. 将数据线的另一端连接到探头的船用连接器上
  3. 将 USB 适配器电缆连接到电脑
  4. 点击 Manta 控制软件启动
  5. 主屏幕将打开,滚动显示实时数据

注意:在连接探头之前不要启动控制软件

LED 灯 (位于水质探头内部的电路板上 – 通过标签开口查看)

  • 绿色:绿灯当通过电缆接收到足够的工作电压时,每秒闪烁一次
    注:如果由内部或外部电池组供电,则不会闪烁
  • 红色:启用记录功能时,开机闪烁 5 次
  • 琥珀色:接收 RS-232 通信时闪烁

使用 Manta 控制软件

In Manta Control Software, click on the PC tab ON Main Menu

PC
Function
Set scroll interval...
Sets the time interval that live data scrolls on the screen
Set snapshot location...
Create a file on your PC where your site data will be stored
Automatic snapshot...
Turn “ON” to capture continuous data in snapshot file location at set scroll interval
Graphing...
Generate on-screen graphs
Com ports...
Selects which COM port is connected to the Probe

In Manta Control Software, click on the Manta tab ON Main Menu

Manta
Function
Manage Manta files...
Access and manage log files stored in the Probe’s memory
Logging setup...
Set logging frequency and name your log file
Call log...
Automatic stored log of all the calibrations in Probe’s memory
Sensors and parameters list...
Selects and enables parameters
Calibrate...
Calibrate sensors - See reverse side for calibration table
Manta version...
Displays firmware version and Probe serial number
Create a custom parameter...
Setup custom sensor parameter
Delete a custom parameter...
Delete custom parameters

请注意:

对于 Trimeter 探头,USB 至 RS-232 适配器和数据线需单独购买。

面向 mantaMobile™ 用户

加载 MantaLink™ 移动应用程序

请参阅您的 mantaMobileBluetooth® 设备随附的说明。使用 QR 码下载应用程序。

Solinst eureka mantamobile appstore qr 代码
appstore 徽标
SOLINST EUREKA MANTAMBILE GOOGLE PLAY QR 码
谷歌播放徽章
Manta Control Hot Buttons
What the Button Does
Manta Logging is ON/Off
Turns On/Off internal Logging
Capture One Line of Data to
Captures data snapshot to Active Snapshot
PC without Annotation
File location
Capture One Line of Data to
Captures data snapshot with notes to
PC with Annotation
Active Snapshot file location
Wipe One Cycle Now
Activates one-time wipe if wiper is present
Clear Screen
Clears data displayed on PC
Restart
Restarts program
  1. 加权传感器防护罩
  2. 水质探测器
  3. 水下电缆(需单独购买)
  4. 校准/储存杯
  5. 活动盖
  6. USB 闪存盘
  7. 用于补充 pH 值基准的 pH 电解质溶液
  8. 数据线
  9. USB 转 RS-232 适配器
  10. 工具包
Solinst Eureka 水质探头和附件

校准表

Sensor
Standard Method of Calibration
Calibration Standards
Comments
Temperature
never requires calibrating
N/A
N/A
pH
2 or 3 points
pH 4, pH 7, pH 10
pH7, pH 10 most common
ORP
1 point
ORP Standard 200 mV
N/A
Conductivity
1 point
CD Standard, 0.5 Molar, 58670 Micro S
brackish/saltwater
Conductivity
1 point
CD Standard, 0.1 Molar, 12856 Micro S
borderline brackish typical
Conductivity
1 point
CD Standard, 0.01 Molar, 1412 Micro S
freshwater very pure
Conductivity
1 point
CD Standard, 0.001 Molar,147 Micro S
fresh/glacial
Reference Electrode
calibration not required
N/A
replace pH electrolyte solution at routine calibration
Depth
adjust for barometric pressure
N/A
recalibrate at deployment site for best accuracy
Turbidity
2 points
0 NTU, 10 NTU, 100 NTU, 400 NTU, 600 and 1000 NTU available by special order
calibrate bracketing expected value
HDO (Optical DO)
calibrate at 100% saturated water
DI water -shake vigorously to oxygenate
set barometric pressure before calibrating, recalibrate at deployment site for best accuracy
Chlorophyll
2 points
liquid dye or Chlorophyll standard
calibrate to zero and calibration standard
Rhodamine
2 points
rhodamine dye standard
calibrate to zero and calibration standard
Blue Green Algae
2 points
lab sample or dye standard
calibrate to zero and calibration standard
Ammonium (NH4+)
2 points
Low 4.63 mg/l; High 46.3 mg/l
calibrate to Low and High Values
Nitrate (NO3+)
2 points
Low 4.62 mg/l; High 46.2 mg/l
calibrate to Low and High Values
Chloride (CL-)
2 points
Conductivity Standard 147 Micro S
enter 34.3 during calibration for low
Chloride (CL-)
2 points
Conductivity Standard 1412 Micro S
enter 319.3 mg/L for high

相关产品

SOLINST EUREKA TRIMETER 水质探测仪

Manta Trimeter 水质探头

三用表可容纳传感器参数列表中的任意一个传感器*,外加温度和深度传感器(两者均可选)。例如,三用表的配置可以是浊度、温度和深度。另一个例子是溶解氧和温度。

SOLINST EUREKA EASYPRBE 水质探测仪

EasyProbe:水质探测仪

易探针 EasyProbe是一款高性能、高性价比的水质监测器。它是抽查、远程遥测、教育、研究、水产养殖等领域的理想之选。EasyProbe20 包括温度、溶解氧、电导率和 pH 值传感器,而 EasyProbe30 则增加了浊度传感器。Eureka 多探头以其可靠性著称,所有传感器均可享受三年保修服务,而且维护成本也是业内最低的。

Solinst levelogger 5 LTC 水位、水温和水导电率数据记录器

水位、温度和电导率数据记录

缆线 Levelogger 5 LTC测量并记录水位波动、温度和电导率。 通过编程,它可以每隔 2 秒钟记录一次。 它配有 8 年电池,可存储 100,000 组读数,并有 6 种压力范围可供选择。 不含 PFAS 的涂层(内部和外部)具有卓越的耐腐蚀性和耐磨性。

用于温度和电导率剖面测量的 Solinst 107 型 TLC 测量仪

TLC 测量仪 - 精确测量温度、液位和电导率

A TLC 测量仪可提供准确、稳定的温度和电导率测量值,并显示在方便读取的 LCD 显示屏上。 静态水位和读数深度从 Solinst 平面磁带上读取,磁带上每毫米或 1/100 英尺都有精确的激光标记。 胶带长度可达 300 米(1000 英尺)。