Tag: 403 cmt multilevel system

CMT Ideal For Chlorinated Solvent Assessment

Certified CMT Installer Michael Early, of ZEBRA Environmental, Tampa, a company specializing in direct push sampling and probing services to consulting firms, recently installed three multilevel groundwater monitoring systems in Pinellas County, Florida. The purpose of this phase of their study is to assess the possible extent of chlorinated solvents in shallow sandy sediments at each site…. Continue Reading »

Comparing Multilevel Systems

The CMT System (Since 1999) CMT offers in-field design flexibility, low cost and is easy to install. The number of monitoring ports, port locations, install depths, and monitoring strategy, can all be accommodated and designed right in the field. The single tube offers effective sealing.The 7-Channel is 1.7″ (43 mm) and the 3-Channel is 1.1″… Continue Reading »

CMT Defines Vertical Gradients And Contamination At A UK Landfill Site

White Young Green Environmental Limited (WYG) is an experienced environmental consulting firm operating in the United Kingdom. WYG was given the task of developing a cost effective means to isolate and reliably sample groundwater quality, and obtain hydraulic head data from various zones, in a complex geological setting, to give detailed vertical gradients. The investigation… Continue Reading »

CMT System The Clear Choice For A German Air Force Base

Contaminants were identified in the subsurface at Rhine Main Air Base, Germany, in a sand and gravel aquifer. The contamination was complex due to two separate sources: a fire training pit, and a former gas station that had leaked various compounds, including BTEX, TPH, PAH, and TCE. The aquifer extends from 7 m up to… Continue Reading »

New CMT Bentonite Packers Used By AECL

Solinst is delighted to announce another installation of the New Narrow 3 Channel CMT (Continuous Multichannel Tubing) Multilevel System using bentonite cartridges. The cartridges are designed to seal the interval between monitoring zones and are ideal for direct push applications where the annulus between the CMT installation and the drilled hole is too small to accurately… Continue Reading »