Résumé des méthodes et techniques de forage
Sondes de qualité de l'eau
Solinst Eureka, leader mondial dans la conception et la fabrication de sondes multiparamétriques de mesure de la qualité de l'eau.
Solinst Field Services
Garantissez la réussite de votre projet et limitez les risques de temps d'arrêt ou de coûts supplémentaires.
Méthodes et techniques de forage pour l’installation de puits CMT dans les aquifères non consolidés
CMT dans les aquifères non consolidés
Drilling Method
Advantages
Preferred CMT Installation Technique
Comments
Sonic
Advancing casing during drilling minimizes redistribution of contaminants in borehole. Steel casing prevents borehole from collapsing as CMT well is being built. Vibrating casing during removal reduces likelihood of bridging annular materials.
Place CMT tubing into casing with anchor plate attached to bottom of tubing. Use tubing centralizers to center tubing inside of sonic casing. Add alternating lifts of sand and bentonite pellets* as casing is withdrawn, either by gravity placement, tremie methods.
Depths up to 300 feet. Use casing with an inside diameter (ID) of at least 4 inches. Addition of water to casing may be needed to prevent heaving as casing removed.
Drilling Method
Advantages
Preferred CMT Installation Technique
Comments
Hollow stem auger (HSA)
Rigs widely available. Augers provide temporary casing that can be withdrawn as CMT well is constructed.
Place CMT tubing with anchor plate into borehole inside of hollow stem augers. Add alternating lifts of bentonite pellets and sand pack from surface as augers are removed. CMT tubing centralizers may be needed to keep annular space open during well construction.
Generally limited to depths of approximately 100 feet. Water may need to be added to augers to counteract heaving sand conditions. Use augers with at least a 4-inch internal diameter (ID).
Drilling Method
Advantages
Preferred CMT Installation Technique
Comments
Direct-Push (DP)
Rigs are widely available.
Insert CMT tubing into DP casing, then withdraw casing.
Best for shallow installations where sand collapses around CMT tubing. May be difficult to tremie sand and bentonite due to small annular space between CMT tubing and DP casing.
Drilling Method
Advantages
Preferred CMT Installation Technique
Comments
Air rotary with casing advance
Casing prevents borehole from collapsing as CMT well is being built. Consistent-diameter borehole. Prevents redistribution of contaminants along borehole wall during drilling.
Place CMT tubing into casing with anchor plate. CMT tubing centralizers should be used to center tubing in borehole. Add alternating lifts of sand and bentonite pellets* as casing is withdrawn, either by gravity placement, tremie methods.
Select casing with at least a 4-inch ID. Addition of water commonly needed to prevent heaving as casing removed.
Drilling Method
Advantages
Preferred CMT Installation Technique
Comments
Mud rotary
Widely available.
Place CMT tubing directly into borehole with anchor plate attached to bottom of tubing. CMT tubing centralizers should be used to center CMT tubing in borehole. Place sand pack and bentonite with a tremie tube and grout pump.
Thin drilling fluid as much as possible prior to installing annular materials. Use a coarse-grained filter pack. Mud filter cake can be difficult to remove with development methods available for CMT wells.
* Les granulés de bentonite enrobés ne s’hydratent pas aussi rapidement et sont donc utiles pour les applications plus profondes. Toutefois, certains granulés enrobés dégagent de l’éthanol ou de l’acétone et peuvent entraîner des limites de détection élevées pour certains composés cibles. En règle générale, les granulés non enrobés conviennent pour des profondeurs allant jusqu’à 100 pieds d’eau.
