Water Quality Monitoring Accessories

5001 solinst eureka water quality monitoring accessories

Accesories for Every Application

Standard accessories for Solinst Eureka Water Quality Probes include, soft padded backpacks, cable reels, copper-gauze anti-fouling kits, rechargeable battery packs, SDI-12 converters, pipe kits, flow cells, and calibration supplies.

Soft Backpack

Durable, soft padded backpacks are available for the Manta+20, 25, 30, and 35. The backpacks include adjustable wide shoulder straps and Velcro interior dividers. Front and side pockets hold additional items,
and the interior flap has a compartment for short underwater cables. The backpacks measure 15″ (38 cm) wide and 20″ (51 cm) high.

Cable Reels

Cable reels are handy for handling longer lengths of underwater cable in the field. The mantaMobile™ Bluetooth® device can be mounted to a cable reel to more easily operate probes for discrete sampling and depth profiling.

5001 solinst eureka cable reels for underwater cables longer than 75 meters

Anti-fouling Sensor Guards

Solinst Eureka uses specialized fine-gauge copper mesh to effectively reduce biofouling during long term deployment of water quality probes. The unique sensor guard surrounds the sensors in copper gauze that slowly dissolves, bathing the sensors with the copper ions that discourage biofouling.

5001 solinst eureka anti fouling sensor guards for water quality probes

Rechareable Battery Packs

External rechargeable battery packs are available all for Manta+ probe models when ordered with the required locking top cap. The packs contain Li-ion batteries. The dimensions are: width: 3″ (7.62 cm); height: 7.5″ (19.05 cm); upper height: 1.5″ (3.81 cm).

5001 solinst eureka water quality probes rechargeable battery packs

SDI-12 and MODBUS

The Manta Multi-Communication Interface Board (MIB) is integrated in all Manta+ and Trimeter Probes. It allows SDI-12 and RS-422 MODBUS data outputs. The SDI-12 and MODBUS Adaptor Cables connect the underwater cables of the Solinst Eureka Probes to the third-party dataloggers.

5001 solinst eureka water quality monitoring using sdi 12 or modbus and telemetry systems

Pipe Kit

PVC pipe kits provide a protective enclosure for added security for your multiprobes used for unattended logging.

Flow Cells

Flow cells are available for every probe model offered by Solinst Eureka. This flow-through chamber takes the place of the sensor guard. Water quality parameters are measured as water is pumped through the flow cell.

5001 solinst eureka water quality monitoring flow cells

Calibration Solutions

Solinst Eureka offers a complete line of calibration standards, including secondary calibration standards for fluorometers.

5001 solinst eureka calibration solutions
solinst eureka multi parameter water probes

Manta Series Water Quality Probes

Solinst Eureka offers the largest selection of water quality sensor technologies in the industry. So in addition to standard configurations, each probe may be customized for your specific application. Pick sensors of your choice to fully populate larger probes, or add a battery pack to convert a probe to a logging device.

solinst eureka trimeter water quality sondes

Manta Trimeter Water Quality Probe

The Trimeter holds any one sensor* from the Sensor Parameters list, Plus temperature and depth sensors (both are optional). For example, a Trimeter configuration could be turbidity, temperature, and depth. Another example could be DO and temperature.

solinst eureka easyprobe water quality sondes

EasyProbe: Water Quality Sondes

The EasyProbe, by Solinst Eureka, is a high-performance, cost-effective water quality monitor. It's ideal for spot-checking, remote telemetry, education, research, aquaculture, and more. The EasyProbe20 includes sensors for temperature, dissolved oxygen, conductivity, and pH, while the EasyProbe30 adds a turbidity sensor. Eureka multiprobes are known for their reliability, with a three-year warranty covering all sensors, and have the lowest maintenance costs in the industry.

Related Products

solinst levelogger 5 ltc water level water temperature and water conductivity datalogger

Water Level, Temperature & Conductivity Datalogging

The Levelogger 5 LTC measures and logs water level fluctuations, temperature and conductivity. It is programmed to record at intervals as often as 2 seconds. It includes an 8-year battery, memory for 100,000 sets of readings, and comes in 6 pressure ranges. A PFAS-free coating (inside and out) provides superior corrosion and abrasion resistance.

solinst model 107 tlc meter for temperature and conductivity profiling

TLC Meter – Measure Accurate Temperature, Level & Conductivity

A TLC Meter provides accurate, stable temperature and conductivity measurements, displayed on a convenient LCD display for easy reading. Static water level and depth of readings are read off Solinst flat tape, which is precisely laser-marked every mm or 1/100 ft. Tape lengths are available to 300 m (1000 ft).