solinst model 410 peristaltic pumps ideal for groundwater and vapor sampling

Peristaltic Pump 12V Battery Holder Instructions

 

Depth Discrete Groundwater Monitoring

Reduce Costs and Field Time

Advantages of Using Water Flute

Tools and Materials Needed

  1. 410 Pump 12V Battery Holder Assembly (#114602)
  2. Flat Head Screwdriver (only required when removing the 12V Battery Holder)
solinst 410 peristaltic pump 12v battery holder assembly

Solinst 410 Peristaltic Pump 12V Battery Holder Assembly (#114602)

 

Connection Instructions

  1. Cut the zip/twist tie off of the Battery Holder and remove the retainer.
  2. Place the Peristaltic Pump on a flat surface.
  3. Slide the retainer so the cutouts fit up against the feet on the bottom of the Pump and the end plate sits in the groove.
    slide solinst peristaltic pump 12v battery holder retainer so cutouts fit against feet on bottom of pump and end plate sits in groove

  1. Line up the Battery Holder with the Pump’s end plate and slide the Battery Holder over the end plate.
    line up solinst peristaltic pump 12v battery holder with pumps end plate and slide the battery holder over end plate

  1. Using the handle, slide the Battery Holder down the end plate and press down on each side to snap the retainer into place.

    2. using solinst peristaltic pump 12v battery holder handle slide the battery holder down the end plate and press down on each side to snap the retainer into place

  2. Place a 12V battery in the Battery Holder.

    3. solinst peristaltic pump with 12v battery installed in batter holder

Note:

The 12V Battery Holder is designed for a battery with maximum base dimensions of 150 mm x 98 mm (5.94″ x 3.86″).

 

Instructions to Remove 12V Battery Holder
from Solinst Peristaltic Pump

  1. Remove the battery from the Battery Holder.
  2. Insert a flat head screwdriver into the slot above the Battery Holder retainer. Bring the screwdriver down to detach the retainer from the base of the Battery Holder.
  3. Slide the Battery Holder from the end plate.

    4. removing 12v battery holder from solinst peristaltic pump

Get Quote

Inertial Pumps

solinst model 404 inertial pumps
  • Ideal for dedication
  • Excellent in silty/sandy environments
  • Easily operated by hand

Bladder Pumps

solinst model 407 bladder pumps
  • Ideal for low flow VOC sampling
  • Durable Santoprene bladders
  • Easy to replace bladder cartridges

Related Products

solinst model 415 12v submersible pump

415 12V Submersible Pump

The Solinst 12V Submersible Pump provides an efficient means of purging and obtaining groundwater samples from 2" OD monitoring wells. The compact pump can sample from depths of 36.5 m (120 ft) below ground surface, and is easy to adjust the flow rates up to 13.5 L/min (3.6 US gpm) in shallower applications.

12V Submersible Pump
solinst model 800m mini low pressure packer

800M Mini Packer

The 800M Mini Packer is 1 ft in length and is designed to fit in nominal 2" OD monitoring wells to temporarily isolate discrete zones for groundwater monitoring and sampling applications – available as a single and straddle packer setup.

Mini Low Pressure Groundwater Packer
solinst model 880 well mount field table

Make Your Life Easier In The Field

Consider making your life easier in the field by ordering one of our convenient Field Tables. We have two models available, Well-mount and Stand-alone, to keep your equipment organized and provide a clean, sturdy surface to hold your field tools.

Well-mount Field Table - 115209
Stand-alone Field Table - 115312

Convenient Field Tables