Language: English ▾
If you have installed your Levelogger using wireline/Kevlar cord, you can communicate with your Levelogger via an Optical Reader and Levelogger Software on a laptop PC.
If you have installed your Levelogger using a Direct Read Cable, you can communicate with your Levelogger via a PC Interface Cable and Levelogger Software on a laptop PC, or using a Levelogger App Interface and the Solinst Levelogger App on your mobile device, without removing the Levelogger from the well.
Note:
A Direct Read to Optical Adaptor can be used to directly connect a Levelogger to a Levelogger App Interface.
Optical Reader
PC Interface Cable
Solinst Levelogger App & Interface
