| Water Level Dataloggers |
Model 3001 Levelogger 5
|
Model 3250 LevelVent 5
|
|---|---|---|
| Level Sensor | Piezoresistive Silicon with Hastelloy Sensor | Piezoresistive Silicon with Hastelloy Sensor |
| Sensor Type | Absolute | Gauged (Vented) |
| Ranges | 5, 10, 20, 30, 100, and 200 m | 5, 10, 20 m |
| Accuracy | ±0.05% FS (lifetime calibration) (+Barologger inaccuracy) | ±0.05% FS (lifetime calibration) |
| Units of Measure | cm, m, ft, psi, kPa, bar (ºC, ºF) | cm, m, ft, psi, kPa, bar (ºC, ºF) |
| Normalization | Automatic Temperature Compensation | Automatic Temperature Compensation |
| Temp Compensation Range | 0ºC to 50ºC | 0ºC to 50ºC |
| Barometric Compensation | Barologger 5 and Software Data Wizard | Automatic via vent tube |
| Temperature Sensor | Platinum Resistance Temperature Detector (RTD) | Platinum Resistance Temperature Detector (RTD) |
| Accuracy | ±0.05ºC | ±0.05ºC |
| Resolution | 0.003ºC | 0.003ºC |
| Battery | Built-in lithium battery | Built-in lithium battery |
| Battery Life | 10 years based on 1 reading every minute | 10 years based on 1 reading every minute |
| Clock Accuracy (typical) | ±1 minute/year (-20ºC to 80ºC) | ±1 minute/year (-20ºC to 80ºC) |
| Operating Temperature | -20ºC to 80ºC | -20ºC to 80ºC |
| Maximum Readings | 150,000 sets of readings | 150,000 sets of readings |
| Memory | Slate or Continuous | Slate or Continuous |
| Communication | Optical high-speed: 57,600 bps with USB, 1200 baud SDI-12 | 9600 bps with USB |
| Size | 22 mm x 160 mm (7/8" x 6.3") | 22 mm x 160 mm (7/8" x 6.3") |
| Weight | 166 grams (5.9 oz.) | 182 grams (6.4 oz.) |
| Corrosion Resistance | Baked-on coating using polymerization technology (inside and out) | Baked-on coating using polymerization technology (inside and out) |
| Wetted Materials | Hastelloy, 316L Stainless Steel, Delrin®, Viton®, Regulator approved PFAS-free PTFE | Hastelloy, 316L Stainless Steel, Delrin®, Viton®, Regulator approved PFAS-free PTFE |
| Programming Options | Levelogger PC Software, Solinst Levelogger App | Levelogger PC Software, Solinst Levelogger App |
| Sampling Mode | Linear, Event & User-Selectable with Repeat & Pause Modes, Future Start, Future Stop, Real-Time View | Linear, Event & User-Selectable with Repeat & Pause Modes, Future Start, Future Stop, Real-Time View |
| Measurement Rates | 1/8 second to 99 hours | 1/8 second to 99 hours |
| Deployment Options | Stainless steel cable, Kevlar cord, Direct Read Cable, etc. | Vented Cable & LevelVent Wellhead |
| Data Collection Options | Levelogger 5 App Interface, DataGrabber 5, LevelSender 5, STS 5 and RRL 5 Telemetry | Levelogger 5 App Interface, DataGrabber 5, LevelSender 5, STS 5 and RRL 5 Telemetry |
| Maintenance | Cleaning sensor, replacing o-rings | Cleaning sensor, replacing o-rings, checking vent tube (blow out fitting), no desiccants to replace |
| Applications |
- deeper applications, higher fluctuations - when barometric data is required (barometric efficiency) - very humid conditions, risk of wellhead flooding - areas prone to long-term freezing conditions - hard to reach areas, cumbersome deployment |
- shallow applications, low fluctuations - surface water, wetlands - watershed monitoring - stormwater and flood monitoring - no option for Barologger deployment, or don't want extra step of data compensation |
