The Levelogger App Interface uses Bluetooth® wireless technology to connect a Solinst datalogger to your smart device. Once connected, you can use the Solinst Levelogger App on your device to communicate with the datalogger. The Solinst Levelogger App allows you to view and save real time data from the connected datalogger, as well as download, view, transfer and e-mail logged readings. You can program the datalogger or apply a saved Setting. The Levelogger App also provides the ability to obtain diagnostic information from a connected datalogger, as well as perform a conductivity calibration for an LTC Levelogger.
The Levelogger App Interface is compatible with Levelogger Edge, Barologger Edge, Levelogger Junior Edge, LTC Levelogger Edge, Rainlogger Edge, LevelVent and AquaVent, as well as Levelogger Gold, Barologger Gold, Levelogger Junior, LTC Levelogger Junior, and Rainlogger dataloggers using the following firmware versions:
|Levelogger Junior Edge||3.004|
|LTC Levelogger Edge||1.003|
|LTC Levelogger Junior||2.005|
Table 1-1 Compatible Datalogger Firmware Versions
If you connect a Levelogger that has an older version of firmware to the Solinst Levelogger App, a warning message will appear in the App (see Section 4.5.1).
The AquaVent logger and Wellhead have separate firmware versions.
1.1.1 Apple® Devices
The Solinst Levelogger App can be downloaded from the Apple App StoreSM to an Apple smart device that is running iOS 11, or later.
- iPad mini
- iPod touch
Later smart device versions will also be compatible.
1.1.2 Android™ Devices
The Solinst Levelogger App is available for download on Google Play™. The Solinst Levelogger App and Interface are compatible with tablets and smartphones running Android Version 8.0 or higher.
Tested on the following devices:
- Phone: Samsung S9 - Model SM-G960W
- Tablet: Samsung TabS4 - Model SM-T830NZKAXAC