Step 4: Programming Your RRL Station
In Step 4, enter the serial number of the RRL Station you are programming; the Location of the Station, i.e.: "Home Station", "Well 1", "Relay Station 2"; the Com Port being used to program the RRL Station; and the Sample Rate for that station (if different from the one set in Step 2).
If you are programming the Home Station, you will select whether there is a datalogger connected to the station. If there is not, you will skip to Step 6. If there is a water level datalogger connected, or you are programming a Remote Station, you will proceed to Step 5.