RRL Remote Utility

To use the Remote Utility, connect a RRL Station to the PC with a RS232 cable, select the COM port to which the station is connected, and click “Retrieve Info” to display the settings from the RRL Station.

To start the RRL Station logging, click “Start”. To stop the RRL Station, click “Stop”.

Click “Radio Test” to determine if communication between the Remote Station (or Relay Station) is successful.

Click “Test” beside any of the Levelogger icons, to determine if communication between the RRL Station and the logger is successful.

solinst rrl remote utility remote radio link remote utility software diagnostic testing for rrl remote radio link connect field computer to rrl connect field computer to remote radio link image

RRL Remote Utility