8.4 Edit Levelogger

The 'Edit Levelogger Menu' displays the attached datalogger's settings. The Leveloader can adjust many of the Levelogger's settings, including: Date/Time, Project ID, Location, Sampling Rate, Sampling Type, Units, and Altitude for some datalogger types. To adjust any setting, highlight it and click the Edit button.


The Levelogger must be stopped in order to change the settings. To stop the Levelogger, press BOTH the UP and DOWN Buttons simultaneously.

Remember to save the log before re-starting.


If there was a password set for the Leveloader, it will need to be entered before you can edit the Levelogger settings. See Section 8.7 for details.