New Water Level DrawDown Meter
2 Products in 1
- Both static water level and drawdown modes in one meter
- One convenient toggle makes it easy to switch between the two functions
- Tape lengths up to 5000 ft. (1500 m)
The New 101D Water Level Draw Down Meter, which has all of the same features as our Model 101P7 Water Level Meter, with the added benefit of the new Drawdown Mode, all in one unit. When in DrawDown mode the probe signals in air instead of water. This is a great feature if you need to know when levels in a well are dropping. The 101D Water Level DrawDown Meter also uses our Laser Marked Flat Tape, with standard lengths to 1000 ft (300m).
Applications Ideal for the Water Level DrawDown Meter
- Depth to water in wells, boreholes, standpipes and tanks
- Drawdown monitoring during:
- Low flow groundwater sampling
- Well development and purging
- Dewatering applications
- Pumping, slug, hydraulic conductivity, step and other aquifer/well tests
Limited Time Offer
Consider combining the Solinst Model 3001 Levelogger with a Model 101D Water Level DrawDown Meter for better results. Drawdown data is a regulatory requirement for the most commonly performed aquifer characterization tests.
Use the 101D Water Level DrawDown Meter to verify Levelogger readings, it is convenient, easy and accurate.
Related Blog Posts
How Using a Levelogger and 101D Together Provides Essential Data What is Drawdown? Drawdown is a change in groundwater level due to an applied stress, caused by events such as: Pumping from a well Pumping from a neighbouring well Intensive water taking from local area Seasonal declines as recharge rates lower How is Drawdown Measured?