4.8 Datalogger Zero

Before starting and deploying your datalogger, you can "Zero" it to current atmospheric pressure. This will ensure that it is reading 0 in air for the level reading.

Note:

To check your datalogger's readings in air, use the Real Time View function. See Section 7.

 

datalogger zero will zero the water level reading for the levelvent water level datalogger

Figure 4-11 Datalogger Zero

 

After clicking Zero, the current time will be displayed as the "Last Zero Time".

Note:

You can not perform a Datalogger Zero while the datalogger is running.

 

datalogger zero can be cleared using the diagnostic utility

Figure 4-12 Last Zero Time

 

The Datalogger Zero can be cleared using the Diagnostic Utility. See Section 10.